Vernier Original LabQuest User Manual

Page 29

Advertising
background image

LabQuest Reference

27

The original release of LabQuest App (1.0, released fall 2007), did not support

spectrometers, radiation monitors, blood pressure sensors, or rotary motion sensors. The

internal microphone was not available for data collection.

LabQuest does not support any kind of wireless networking at this time.

LabQuest does work with most older Vernier sensors. An adapter, DIN-BTA, is required

for sensors with a round, 5-pin DIN connector. Such sensors will not auto-ID, but can be
set up manually using Sensor Setup found in the Sensors menu.

Curriculum Resources from Vernier Software & Technology

See www.vernier.com/cmat for a complete list of curricular materials available for

LabQuest. Activity books contain multiple versions of activities, prepared for LabQuest,
computer-based data collection using Logger Pro, and other data collection platforms.

Troubleshooting

Reset Your LabQuest
If your LabQuest stops responding, reset it. There are three ways to reset the LabQuest. Try
these in the order listed below.

1. Soft Reset: For a low-impact restart, tap the Home icon on the bottom panel, select

Control Panel, and then select Reboot.

2. Medium Reset: Reboot from the Control Panel as in the Soft Reset above. When the

screen goes black, press the Reset button on the back of the LabQuest right below
where the stylus slides into place. Use the stylus to press and hold the button for a
several seconds.

3. Hard Reset: The last thing to try is the reset button on the back of the LabQuest

right below where the stylus slides into place. Use the stylus to press and hold the
button for a couple of seconds.


Note: Do not use a Hard Reset unless both the screen and hardkeys are not responding.

Get Additional Help
Additional help on using your LabQuest is available at www.vernier.com/labquest You may
also contact Vernier directly at 888-837-6437 in the United States, or using

[email protected]

.


If your LabQuest was purchased outside the United States, please contact your distributor
for assistance.

Advertising