Cybex TWINYX - Manual (Page 29)

29
a)
a)
a)
With the locking pins facing you slide the
handle into recepticle.
Push in the locking pins and push handle
in until it makes an audible „click“.
Attention!
The pins on both sides must be fully
engaged.
Attention!
The Wheel system with the brake pedal
must be fitted to the right side of the
buggy (viewed from behind the buggy).
Attention!
The pins on both sides of the wheel
system must be fully engaged. Ensure the
bowden cable is inserted into the clips.
Fit the front wheels to the end of the frame
until they engage with a “click”.
2. ASSEMBLING THE HANDLES
3. ASSEMBLING THE FRONT WHEELS
4. ASSEMBLING THE REAR WHEELS
EN