Cybex TWINYX - Manual (Page 34)

34
d)
e)
To release the harness buckle, simply squeeze both sides of
the harness buckle together. This will then release the buckle
tongues.
The length of the crotch strap is adjusted by moving the slider
up or down.
a)
11. ADJUSTING THE HARNESS SYSTEM FOR NEWBORNS
• Release the loops located at the end of the shoulder straps
from the metal triangle attached to the belt system. The
triangle is situated at the bottom of the backrest underneath
the seat cover.
• Completely pull the shoulder straps out of the holes of the
backrest and the fabric seat cover.
• Feed the shoulder straps through the two lower holes in the
seat cover. Make sure to feed the straps back through the
sloted holes of the plastic backrest mechanism and re-attach
them to the triangle.
• To adjust the length of the shoulder straps for newborns
please use the the inner loop of the shoulder strap ends and
attach them to the metal triangle. Switch back to the lower
holes as soon as the shoulder straps do no longer fit over the
child´s shoulders.
a)