Citrix Systems 9000 Series - Manual (Page 21)

Getting Started
SSL VPN User’s Guide 2-13
2.4.2 Terminating the Session for the Browser Plug-in
The following procedure covers the steps to terminate the session for the
agent.
1. Click
Logout on the plug-in window. The following message box is dis-
played.
Figure 2-17 Confirmation message box
2. Click OK . The Citrix Windows Cleanup dialog box is displayed as shown in
Figure 2-14.
3. Select a cleanup option from the Select Cleanup Level box and click
Cleanup . The cleanup process is initiated and the status is displayed on the
dialog box as shown in Figure 2-15.
4. Once the cleanup process is completed successfully, click Exit .
2.5 Understanding the Cleanup Process
The administrator of the SSL VPN gateway controls the cleanup process. As a
result, the cleanup dialog box is displayed only if the SSL VPN administrator
has configured the gateway to do so. In addition, the SSL VPN administrator
can also configure the gateway to delete specific data sets, from your com-
puter, when you exit the session. The options corresponding to these data sets
are disabled on the List pane of the Citrix Windows Cleanup dialog box. The
remaining options are either grayed out or activated based on the cleanup
level that you have chosen.
2.5.1 Understanding the Data Sets
As mentioned earlier, the data generated during the SSL VPN session can be
misused to obtain confidential information. For example, you can configure the
client to delete all passwords and auto complete data stored by the browser.
To select the data set, you need to access the List pane on the Citrix Windows
Cleanup dialog box by clicking the List tab. The List pane is shown in the fol-
lowing figure.