Talkaphone ETP-GSM GSM Cellular Interface User Manual
Page 3
ETP-GSM
– Cellular Interface
Installation Instructions
Page 3 of 10
Rev. 12/16/2014
Copyright 2014 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate any approval, endorsement, sponsorship, or affiliation
with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
V. Installing the Cellular Interface
1. The front panel of the ETP-GSM Cellular Interface provides the following:
(1) Cellular signal strength indicator;
(2) LED indicators for
POWER
,
CELLULAR
, and
STATUS
;
(3)
PHONE-FXS
port for connecting to an ETP-400 Series Phone.
Figure 2.
Front panel of the ETP-GSM Cellular Interface.