Talkaphone ETP-GSM GSM Cellular Interface - Manual (Page 9)

ETP-GSM
– Cellular Interface
Installation Instructions
Page 9 of 10 Rev. 12/16/2014
Copyright 2014 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate any approval, endorsement, sponsorship, or affiliation
with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
14. Using the built-in mounting flanges, attach the ETP-GSM Cellular Interface onto the internal mounting
panel of the Talk-A-Phone enclosure (e.g. ETP-MT/R-OP-SOLAR). The ETP-GSM Cellular Interface
should be mounted so that the 12VDC input terminal is on the lower right corner (i.e. toward the Earth).
Figure 8. This photo illustrates the appropriate mounting position and orientation for the ETP-GSM Cellular Interface.
Earth
12VDC
Input Terminal