Chauvet DMX-55 DMX - Manual (Page 12)

Operating Instructions
DMX-55 User Manual 12
2006-01-11 11:59:07
C O PY SC AN N E R S ET T I N G S
This operation allows the user to copy the programming state of one scanner to another. This is
especially useful when both scanners are of the same type.
Action

1) Hold and maintain the Scanner button
to copy.
2) Tap another Scanner button to copy
settings into.
Notes

C O PY SC E N E
Action

1) Press the Program button until the LED
blinks.
2) Use

BANK and

BANK buttons to
change banks.
3) Tap the scene to copy within the bank.
4) Use

BANK and

BANK buttons to
change to another bank if desired.
5) Tap MIDI/Rec button.
6) Tap the SCENES button you wish to
copy the scene to.
Notes

D E L ET E S C EN E
Action

1) Press the Program button until the LED
blinks.
2) Use

BANK and

BANK buttons to
change banks.
3) Tap the scene to delete.
4) Press and hold the Auto/Del button and
tap the scene button you wish to delete.
Notes

All DMX channels for the deleted scene will be set to
0.
D E L ET E AL L SC E N ES
Action

1) Power off the controller.
2) Press and hold the Program and BANK
buttons while turning the power back
on.
Notes

C O PY B AN K
Action

1) Press the Program button until the LED
blinks.
2) Use

BANK and

BANK buttons to
select the bank to copy.
Notes
