Warpia SWP200 Windows Installation Manual & Troubleshooting Guide - Manual (Page 15)

Wireless USB DisplayDock Set User Guide
Page 15
4.3 Blocking or Disassociating a Device
The Wireless USB Manager screen allows you to remove devices or to temporarily disable
them from connecting to the Host.
To Block a device temporarily, and prevent it from connecting to the Host:
 Right click the device name in the Connection list and select Block Device.
Figure
5:
Wireless USB Manager context menu
To remove a device from the list of available devices completely:
 Right click the device name in the Connection list and select Disassociate Device
Figure 6: Wireless USB Manager– remote device blocked
Note : The Disassociate Device option is only available for Device Adapters that are
purchased separately and not in a set.
For information about pairing an Adapter set, see Appendix B: Pairing Procedure.
Table 3: Context Menu Options
Menu Option Description
Block/UnBlock Device Allows you to temporarily disable a device from connecting with the Host.
Disassociate Device Removes the device from the list. To return the device to the list, Pairing must
be performed again.
Properties Displays the properties screen for this device.