Warpia SWP200 Windows Installation Manual & Troubleshooting Guide - Manual (Page 18)

Wireless USB DisplayDock Set User Guide
Page 18
5 Using and Configuring the Easy Dock
5.1 Using the Easy Dock Video connection
The following are suggested work modes for connecting a display screen to the Easy Dock:
 Mirror Mode
 Extend Mode
 Laptop with Lid Closed
 External Display Only
Note : On Windows XP/Vista, the display properties for the Easy Dock can be configured in
two ways: as described in Sec. 5.3.1 Configuring the Display via the Display Icon
Context Menu in Windows XP/Vista, or as described in Sec. 5.3.2 Configuring the
Display via Windows Display Properties in Windows XP/Vista.
On Windows 7, refer to Sec. 5.2 Configuring Display in Windows 7.
When changing settings, or during first connection between the PC Adapter and Easy
Dock, the PC display may flicker or turn on and off as the screen resolution is
automatically adjusted.
Upon first time operation, the Easy Dock is in Extend mode, this section (Sec. 5.1) describes
the different modes that can be set.
In Sec. 5.2 and 5.3.2 you will find the procedures for configuring these modes.
5.1.1 Using Mirror Mode
Mirror
mode is used to display the identical content on the additional screen as is shown on
the main PC/Laptop screen. Mirror mode is generally used to display the PC contents on a
larger or higher definition display. See Figure 9: Mirror Mode - displaying PC desktop on a
larger display screen.
Figure 9: Mirror Mode - displaying PC desktop on a larger display screen