C. Crane ATS-909X - Manual (Page 34)

OPERATING LOCK
The operating lock prevents unintentional altering of any of the
functions once set or accidently turning off the radio. Once set
the STANDBY/SLEEP button and all tuning operations become
unalterable and can not be reactivated until the lock switch is
turned off. It is a good policy to turn on the lock switch when
transporting the radio as it will prevent the radio from being turned
on accidently while in a bag or suitcase. To turn the lock switch,
press the lock switch button. When the lock switch is the ON
position a lock symbol will appear in the display. To unlock radio,
press lock switch button again. This will unlock the radio and
remove the lock symbol from the display.
AERIALS
The ATS-909X comes equipped with a integrated ferrite antenna
built into the radio that should provide more than adequate
reception for the MW and LW bands. For FM reception, it is
advised that the telescopic antenna be extended and adjusted in
length and direction for maximum results. Included with the
ATS-909X is the Sangean ANT-60 Portable SW Antenna.
The antenna is plugged into jack labeled AM EXT ANT. When fully
extended this antenna should improve SW reception. For maximum
performance this antenna should be placed as high as possible
above the ground and in an unobstructed area if possible.
Aux-in
A 3.5mm stereo Auxiliary Input socket is provided on the left hand
side of your radio to permit an audio signal to be fed into the unit
from an external audio device such as iPod, MP3 or CD player.
Just connect the external audio and turn on the radio. Press the
Aux in switch then you can play the external audio device with your
ATS-909X now. Adjust the volume control on the radio as needed.
MW /AM STEP
In Europe and most other parts of the world set the switch to the
9 kHz position. For the America set the switch to the 10 kHz position.
32 33