C. Crane ATS-909X - Manual (Page 35)

The jacks on the left side of the radio are for audio output
(Line-out) and a timer activation (Standby out) to control
external recorder.
The ATS-909X has 3 timers which can be set for radio alarm and
can also trigger recording standby out to control external recorder
as Sangean’s DAR-101. You can connect an external audio device
to record or play the programs received by the ATS-909X. You can
also set up a recording preset using the alarm function of the
radio at the same time. Regarding the setting up of the radio alarm
function, you may refer to above procedure.
To record or play the programs received by the ATS-909X,
connect between the Line-out jack of the ATS-909X and the
Line-in (or Aux-in) jack of the external recorder via a stereo
3.5Φmm wire. Also to trigger standby out to control
external recorder, connect between the Standby out jack of the
ATS-909X and the remote jack of the external recorder as
Sangean’s DAR-101 via a 3.5Φmm plug into the audio input jack
of the recording device.
REC STANDBY/LINE-OUT
34 35
GB