C. Crane BC345CRS - Manual (Page 12)

12
Number Key/Knob What it does
5 SNOOZE/
Light
Snooze: Press while the alarm sounds to silence the alarm for
5 minutes.
Light: Tap to turn on the backlight for 15 seconds. Press and
hold to turn the LCD backlight on permanently. Press and hold
again to turn off the backlight.
6 Time slide
switch
Use to select your desired operation: Alarm Set; Clock Set;
Clock.
7 HOLD/Sleep HOLD: press to temporarily stop scanning, limit searching, or
weather scanning and remain on the channel. The scanner
displays the channel on hold. Press again to resume searching
or scanning.
Sleep: Press and hold to set how long the unit will remain on
before it turns itself off.
8 E/PgM Program mode: Press to enter the Program mode. Then:
3. Enter the desired frequency using the numeric keys.
4. Press E/PGM to store that frequency into the memory.
In Limit Search mode, Press
E/PgM
after entering the
frequency to program the upper and lower frequency limits.
9 0 to 9 -Press a numeric key to enter a frequency.
-Press a numeric key to change a channel (Direct Channel
Access feature)
-Press a numeric key to enable or disable a channel banks.
These channel banks display across the top of the LCD.
10 Power Press to turn power on and off. The time displays when power
is off (Standby mode).
11 ./Clr -Press to input a decimal point when you enter a frequency.
-Press to cancel a numeric key input
( 0
to
9)
-Press to clear an error display.
12 SEARCH/
AM
In Scanner mode: Press to start a Limit Search or to resume
searching.
In AM mode: Press to select the AM memory bank.
In Service Select mode: Press to select POLICE service.