CANOGA PERKINS 9120 Gigabit Ethernet Media Converter - Manual (Page 17)

Canoga Perkins
9120 Gigabit Ethernet Media Converter 3-3
3.2.2 Link Loss Forwarding - User to Extension
When a loss of signal is detected is detected on the User Rx port, the fault is propagated to the
Extension port. The Extension Tx LED will display red, indicating the propagation of the fault to the
Extension port. The fault is then propagated to the remote link.
Note: The DIP switch Link Loss Forwarding feature must be enabled (up) and the Direction switch
set to "User to Extension (down)."
Figure 13. Link Loss Forwarding - User to Extension.
Extension
Port