CANOGA PERKINS 9151 Network Interface Device - Manual (Page 52)

S security
general parameters, 3-11
screen
lockout, 3-11
Connected Sessions, 3-13
logout, 3-11
Description Report, 3-6
password characteristics, 3-11
Double Tagging Configuration, 3-21
SNMP parameters for traps, 3-14
Dynamic ARP Table, 3-24
Security Configuration screen, 3-11
Fdb log, 3-24
serial port mode, 3-8
Global Spanning Tree Parameters, 3-18
Set Date and Time screen, 3-6, 3-7
Global Spanning Tree Report, 3-22
SLIP mode, 3-8
Host Access Table, 3-7
LAG [name] Definition, 3-23
SNMP
trap notification, 3-14
LAG [name] Status and Systistics, 3-23
user accounts, 3-12
LAG Configuration, 3-19, 3-23
SNTP
Latency/Jitter Test, 4-4
Configuration screen, 3-6
Login, 3-5
date and time, 3-6
Management Packet Control, 3-9
software update, 3-10
MST Instance Configuration, 3-22
Spanning Tree Protocol, 3-16
PING Generation, 4-5
SPx Information screen, 3-20
Port Information, 3-18
Security Configuration, 3-11
SPx VLAN ID Translation screen, 3-20
SPx VLAN Priority Translation screen, 3-20
Set Date and Time, 3-6, 3-7
Static ARP Table screen, 3-24
SNTP Configuration, 3-6
STP application, typical, 3-16
SPx Information, 3-20
switch setup, general stepsr, 3-17
SPx VLAN ID Translation, 3-20
SPx VLAN Priority Translation, 3-20
System Configuration screen, 3-7
system date and time, 3-6
Static ARP Table, 3-24
System Information screen, 3-6
System Configuration, 3-7
System Log screen, 3-9
System Information, 3-6
T System Log, 3-9
Trap Configuration, 3-8
terminal connection setup, 3-2
Trap Notification/Destination Table, 3-14
time and date, 3-6
Traps Log, 3-9
Trap Configuration screen, 3-8
User Accounts, 3-12, 3-13
Trap Notification/Destination Table screen, 3-14
VLAN Configuration, 3-20
Traps Log screen, 3-9
VLANx Information, 3-20
troubleshooting
screens
fiber optics, 4-4
general navigation and format, 3-2
latency/jitter, 4-4
organization, 3-3
new installation, 4-4
PING, 4-5
9151 Network Interface Device I-2