Functional setting operation, Jigging) – Daiwa SEABORG-1000MT User Manual
Page 27
25
Functional setting operation
(8. Jigging)
Jigging
Jigging is an extremely valuable function.
After setting your preferences, pressing the
JIG/PICKUP BUTTON
starts the function.
Speed of the jigging can be adjusted with the power lever.
1.
Press the
MODE BUTTON
to show pickup / jigging display.
(When jigging is chosen, the pickup function cannot be used.)
2.
Jigging pattern is selected with the power lever.
There are four patterns; 123 (master), 1 step, 2 steps, 3 steps.
Jigging setting displays appear in the following order;
Pattern (step) > length (m) > waiting time (sec) > range (m)
3.
Press
MODE BUTTON
to show the next display. Pressing it
also locks in the previous setting.
5.
After pressing the
JIG/PICKUP BUTTON
, use the power lever
to start jigging.
Jigging speed is controlled with the power lever.
As the jerking starts, indicator blinks.
Pressing the
JIG/PICKUP BUTTON
again stops jigging.
1
3
5
Interval time
Jig/pickup
Jigging distance
4.
In the same manner, set length, waiting time and range.
By pressing the
JIG/PICKUP BUTTON
during the jigging setting
display, the display will show depth and begins jigging.
Pressing and holding the
MODE BUTTON
will quickly scroll you
back to the depth counter display.