Daiwa SEABORG-1000MT - Manual (Page 8)

6
Names of the buttons and the display
MODE BUTTON
RESET BUTTON
SPEED/POWER RANGE INDICATOR
JIG/PICKUP BUTTON
MODE BUTTON
Press the MODE BUTTON to scroll through the adjustment displays for each reel function.
- Use the Power Lever to adjust numeric values.
- Pressing the MODE BUTTON sets the numeric values you have adjusted.
- Depress and hold the MODE BUTTON to return to the depth display.
- Mode change cannot be done while line is being fed.
RESET BUTTON
-This button resets the depth counter to zero.
-Make sure to press this button before you start fishing. The reset depth is used to make the auto stop function
work. (display shows ).
-For 10m or longer line, the RESET BUTTON must be pressed and held for 2 seconds, or must be quickly pressed
3 times within 2 seconds, to prevent accidental resetting.
-The RESET BUTTON must be quickly pressed 3 times within 2 seconds. This prevents accidental resetting. For a
total reset, when line has been broken off, press and hold the button for at least 2 seconds.
INVERSE COUNTER BUTTON
Pressing this button resets the counter in the lower area of the display.
- It memorizes distance from the bottom, handy for dropping a bait right back into the strike zone after youʼve been bit.
- The chumming timer resumes after pressing this button.
1
2
3
INVERSE COUNTER BUTTON
Mode display
Depth counter
Jigging display
Chumming timer
(Power indicator, time to wind up,
timer display)
Inverse counter
(winding speed display)
SHIFT BUTTON