Citronic CL1200 - Manual (Page 9)

170.881UK User Manual
Remote Control for MPR Media Player/Recorder
The MPR module is supplied with an infra-red
handheld remote control to handle some of the
onboard controls away from the console.
Before use, it is necessary to pull out the clear tab at
the base of the handset to engage the battery.
This remote control is most effective in line of sight
with the “IR” receiver on the MPR window.
Key assignments are detailed on the diagram shown
here.
Graphic Equalizer
The main EQ is an illuminated stereo 9-band graphic equalizer with built-in feedback detection and can be
assigned to main output or monitors. This offers refined audio spectrum shaping and feedback control for live
mic situations.
46. EQ sliders. Each slider controls a boost or cut
of up to 12dB centred at the
specified frequency with an LED to
aid visibility in dark situations.
47. Feedback
Press in to engage the feedback
Detection detection circuit. All slider LEDs
Will be dimmed until feedback is
detected and then the band
within which the feedback is
detected will illuminate brightly.
Move this fader down to reduce or
eliminate the risk of feedback at that
frequency.
48. L/R MON1-2 The graphic equalizer is normally assigned to main left & right outputs but
pressing this button in will assign it to monitor 1 and monitor 2 outputs instead.
This gives the option of EQ and feedback control for monitors instead of main outputs.
49. EQ OUT/IN When this button is pressed in, the graphic equalizer is in operation and the slider LEDs
will be lit. When the button is out, it is not in operation and the slider LEDs will be off.