ClearSounds AMPLIFIED FREEDOM PHONE WITH FULL CLEARDIGITAL POWER CSC1000 - Manual (Page 23)

23 – ENGLISH
█ Dialing Mode Setting
Your ClearSounds® CSC1000 comes from the factory preset
for touch-tone service. Should you need to change this setting
based on the type of telephone service you have, use Tone for
touch-tone service or Pulse for rotary dialing. NOTE: If you
are not sure which dialing mode to select, please contact your
local phone service provider.
1. Press the Menu soft key to display the main menu list.
2. Press ▼ to move to Set Phone and then press the Select
soft key.
3. Press ▼ to move to Dialing Mode and then press the
Select
soft key. The display shows the current setting.
4. Press ▲ or ▼ to choose between Tone and Pulse and
then press the Save soft key.
5. To exit, press the Back soft key to return to the previous
screen and then press the Exit soft key to return
to the main screen. Otherwise, after 1 minute, the
display will automatically return to the main screen.
█ Menu Keys Tone Setting
Your ClearSounds® CSC1000 comes from the factory preset
for menu Keypad Tones ON. This refers to having an audible
tone when navigating the menu to verify a selection. To
change this setting:
1. Press the Menu soft key to display the main menu list.
2. Press ▼ to move to Set Phone and then press the Select
soft key.
3. Press the Select soft key to access Set Ring. The display
shows Day Volume:
4. Press ▲ to access Keypad Tones.