ClearSounds AMPLIFIED FREEDOM PHONE WITH FULL CLEARDIGITAL POWER CSC1000 - Manual (Page 44)

44 – ENGLISH
1. Press the Menu soft key to display the main menu
list.
2. Press ▼ to move to TAM setup and then press the
Select
soft key.
3. Press ▼ to choose Ring number and then press the
Select
soft key.
4. Press ▲ or ▼ to choose the answer rings (3-6 Rings
or toll saver
) and then press the Save soft key.
5. To exit, press the Exit soft key twice to return to
the main screen. Otherwise, after 1 minute, the
display will automatically return to the main screen.
Security ID
To operate your answering machine remotely, you will need to
enter the Security ID code. For security reasons, you should
change this code (the default one is 123). For more details
on how to use remote access, please refer to Remote Access
listed below. To change your Security ID code:
1. Press the Menu soft key to display the main menu list.
2. Press ▼ to move to TAM setup and then press the Select
soft key.
3. Press ▼ to choose Security ID and then press the Select
soft key.
4. The display shows the current security ID. Enter the new
one you want to use and then press the Save soft key.
5. To exit, press the Exit soft key twice to return to the
main screen. Otherwise, after 1 minute, the display will
automatically return to the main screen.
Remote Access
You can access many features of your answering machine
remotely from any touch tone phone. A three-digit security ID
is required to access the system and the factory default ID is
123. To enter remote access: