ClearSounds AMPLIFIED FREEDOM PHONE WITH FULL CLEARDIGITAL POWER CSC1000 - Manual (Page 34)

34 – ENGLISH
When a voice mail message is left, the screen will display “New
voice mail” and the message will be saved as a call. If you have
new messages, you will hear a stutter dial tone when you pick
up the handset. The CSC1000 has a message indicator light,
which will blink when you have new messages and will continue
to flash until the message has been retrieved. You can utilize
the one-touch voice mail button if you have programmed your
voice mail access phone number. Follow the steps provided
from your phone provider to listen to your message(s).
NOTE: You may permanently turn off the red
flashing visual indicator for both message waiting
and new calls by simply setting the indicator to
the OFF position (this switch is located on the
right side of the telephone).
In order to utilize the Caller ID features, you must subscribe
to Caller ID service through you local phone provider. There
are fees for Caller ID services, and it may not be available in
all areas. This product can provide information only if both you
and the caller are in areas offering Caller ID service and both
telephone providers use compatible equipment.
This telephone automatically displays an incoming caller’s
number/name along with the date and time of the call. It
will record up to 30 calls of up to 15 digits and store the
data into memory.
█ Receiving CID Records
When you receive a call, the Caller ID information is transmitted
between the first and second ring. The Caller ID information
appears on the display while the phone rings, giving you a
chance to monitor the information and decide whether or not
to answer the call.
Visual Indicator
ON/OFF Switch
CALLER ID (CID) OPERATION