Dynon Avionics EMS-D120 Installation Guide User Manual
Ems-d120
Advertising
Table of contents
Document Outline
- 1. INTRODUCTION
- 2. WIRING OVERVIEW
- 3. TRANSDUCER INSTALLATION
- Tools and Equipment Required
- Exhaust Gas Temperature (EGT) Probes
- Cylinder Head Temperature (CHT) Probes
- Tachometer
- Manifold Pressure Sensor
- Oil Pressure Sensor
- Oil Temperature Sensor
- Fuel Pressure Sensor
- Fuel Flow Sensor
- Fuel Level Sensor
- Ammeter Shunt
- General Purpose Inputs
- Contacts
- General Purpose Thermocouple
- 4. INSTRUMENT INSTALLATION
- 5. EMS CONFIGURATION
- Full-Page Setup Menu Overview
- Alarm and Color Threshold Configuration
- Global Parameters Setup
- Engine Type Configuration
- Fuel Level Calibration
- Trim Calibration
- Flaps Calibration
- Tachometer
- Manifold Pressure
- Oil Pressure
- Oil Temperature
- Exhaust Gas Temperature (EGT)
- Cylinder Head Temperature (CHT)
- Fuel Level
- Fuel Pressure
- Fuel Flow
- Voltage
- Current
- General Purpose Inputs
- Contacts
- General Purpose Thermocouple
- 6. DSAB CONFIGURATION
- 7. APPENDIX