Leica Geosystems Leica mojoXact Plus - Manual (Page 112)

112 NMEA Output, Leica mojoXact Plus
8.1.3 NMEA 2000 Setup
To configure the NMEA 2000 settings, carry out the following steps:
4. On the NMEA Settings screen select the Output NMEA 2000 checkbox.
A message appears stating that the system must restart to change the NMEA
2000 status.
5. To complete the NMEA 2000 Settings setup by allowing the restart to occur,
select .
To cancel the change to the checkbox and return to the System Settings menu,
select .
1. At the main navigation screen, select the Settings button.
The Settings menu appears.
2. On the Settings menu, select the System Settings button.
The System Settings menu appears.
3. On the System Settings menu, select the NMEA Settings button.
The NMEA Settings screen appears.