Leica Geosystems Leica mojoXact Plus - Manual (Page 130)

130 Software Maintenance, Leica mojoXact Plus
Should the software upgrade fail, select to return to the main navigation
screen, or select to return to the Software Settings menu.
11.2 Upgrading Software from a USB Memory Key
General informa-
tion A new version of mojoXact Plus software may be installed from a USB memory key.
The new version of software must be downloaded from Virtual Wrench onto the USB
memory key.

Refer to "Appendix B Formatting USB Memory Keys" for important informa-
tion about using USB memory keys with the mojoXact Plus.
ƽ
CAUTION Do not turn the mojoXact Plus off, or remove the USB memory key, while the soft-
ware upgrade is in progress.
Upgrading soft-
ware from a USB
memory key, step-
by-step To upgrade the mojoXact Plus software from a USB memory key, carry out the
following steps:
1. The USB interface is at the front of the
mojoXact Plus. Unscrew the door at
the front so it can open and lie flat, and
insert a compatible USB memory key
into the USB slot.
2. On the main navigation screen, select the Settings button.
The Settings menu appears.
3. Select the Software Settings button.
The Software Settings menu appears.