Cassette tape player basics, Ejecting the tape, Blank skip – Panasonic CQRX65EU User Manual
Page 10: Notes, Repeat play, Metal tape mode, Continued
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cassette Tape Player Basics
continued
Ejecting the Tape
Press A and the cassette will eject for removal, and the previous mode
of operation will be resumed.
Notes:
• If power is switched off before
± .
is pressed, the cassette will not eject.
Switch on the power again and press
^
to eject the cassette.
• The cassette tape should always be removed from the cassette slot
when not in use.
Blank Skip
Press 5 (B SKIP) to skip long unrecorded portions on the tape.
This is most convenient if you quickly want to skip the remaining un
recorded portions at the end of the tape and fast forward to the beginning
of the first music on the reverse side of the tape.
Notes:
• “B SKIP” indicator lights. However, the blank skip operation will not
work if REPEAT is on. The repeat function has priority over that of the
blank skip function.
• Also the blank skip operation will not work when the unrecorded portion
of the tape is less than 15 seconds.
Repeat Play
Press 4 (REPEAT) to repeat the same music you are now listening to.
After finishing the music just listened to, the rewind starts automatically
until the beginning of music, and the same music starts playing again. To
turn it off, press 4 (REPEAT) again.
Metal Tape Mode
Press 1 (MTL) when playing metal or chromium dioxide (Cr02) tapes.
To turn it off, press MTL again.
Note: Playing non-metal tapes in MTL mode causes high frequency im
balance, which affects tone quality.
10
CQ-RX65EU