Final installation, Final checks, Installation guide – Panasonic CQRX65EU User Manual
Page 18: Continued
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation Guide
continued
Motor Antenna
Connect the vehicle motor antenna lead to the blue
motor antenna relay control lead.
Battery
Connect the yellow battery lead to the correct radio
wire or to the battery fuse port on the fuse block.
Telephone Mute
Connect the orange telephone mute lead as instruct
ed in your cellular phone operator manual.
□ Final Installation
Lead Connections
Connect all wires, making sure that each connection
is insulated and secure. Bundle all loose wires and
fasten them with tape so they won't fall down later.
Now insert the stereo unit into the mounting collar.
Congratulations! After making a few final checks,
you’re ready to enjoy your new auto stereo system.
Antenna
Connect the antenna by plugging the antenna lead
into the antenna receptacle.
Equipment
Connect any optional equipment such as amplifier,
according to the instructions furnished with the
equipment. Keep about 12 inches (30 cm) of dis
tance between the speaker cords/amplifier unit and
the antenna/antenna extension cord. Read the oper
ating and installation instructions for any equipment
you will connect to this unit.
□ Final Checks
1. Make sure that all wires are properly connect
ed and insulated.
2. Make sure that the stereo unit is securely held
in the mounting collar.
3. Turn on the ignition to check the unit for proper
operation.
If you have difficulties, consult your nearest autho
rized professional installer for assistance.
Power
Connect the red power lead to the correct vehicle
radio wire or to the appropriate fuse port on the fuse
block.
If the stereo unit functions properly with all these
connections made, disconnect the wires and pro
ceed to the final installation.
18
CQ-RX65EU