Panasonic PV C1322 - Manual (Page 16)

TV Timer Features
ON-THVIER with Alarm
This unit can be set to automatically power on in one of 2
modes (TV, Playback, or FM radio).
You can also combine the On-Timer with a one minute
alarm that gradually increases in volume.
Press PROG to display SET PROGRAM
screen.
1
^ I Ready Check List
□ The clock is set to correct time.
SET PROGRAM
PROGRAMM»G
GH
SELECT ▼
SET :►
END :PROG
1) Press AT to select
“ON TIMER.”
2) Press ► to display
ON TIMER screen.
vi/ONITHMER
6:-AM CH-
AuvraJI-ot/l'
SELECT :A T
SET :►
END :PHOG
ON-TIMER mode
selection order
^CH02—CH03"
CHOI
L f M9—FMB...........
■ CHI 25
1
PLAY
1) Press AW to select
desired settings.
2) Press ► to set the
ON-TIMER TIME or
ON-TIMERmode.
• Make sure a tape is
inserted if Playback
mode is selected.
• See “FM Radio” on
pages 20 and 21 for
instructions on how to
preset FM stations.
ON TIMER
piBU
..............
m
ESSiQ]
CANCEL:ADO/DLT
SO.ECT;* ▼
SET ►
END :PflOG
Press
AW
to select
ALARM “ON” or
“OFF.”
When “ON” is selected,
an alarm will gradually increase in volume for one
minute or until canceled by pressing any button
(including VOL + -).
To Make Corrections,
use
AW
and ◄ ► to move back and correct.
Press PROG to set ON TIMER.
• “ON TIMER SET’ is displayed.
• ON TIMER Indicator lights on the unit.
To Cancel ON-TIMER set,
Repeat steps 1 and 2. Then, press ADD/DLT to
clear the time in step 3. Now, press PROG to end.
“ON TIMER END” briefly appears on-screen.
• If no button on the remote or unit
(including a button used to turn off
the alarm) is pressed within 60
minutes after unit turns itself on,
it will turn itself back off.
16
For assistance, please call: 1-800-211-PANA(7262) or serxl efnail to : consurneq3it)ducts@panasofiitxcom