Tape operation (continued), Press counter reset at the, Continue playback, rewind, or fast forward – Panasonic PV C1322 User Manual
Page 26: Press stop, Press cm/zero, Repeat play, 1) press, 2) press action to, 1) press at to, Tape operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tape Operation
(continued)
Zero Search
To quickly return to a specific tape counter location.
1
Press DISPLAY
during playback to
display the Counter.
0:00:00
d
' 1
BEGIN
END
Press COUNTER
RESET
at the
desired position to
reset to “0:00:00.”
Continue playback, rewind, or
fast forward.
Press STOP.
Press CM/ZERO
in stop mode to
start ZERO
SEARCH.
• T: Presentpcsitionnnark
V: Zero position mark
Unit goes into FF or REW mode and stops at
the last point the Counter was set to 0:00:00.
—
1:23:45
rn
BEGIN
END
If a blank portion exists on the tape, and
depending on the position of the V mark, the
V mark display may be out of position.
Repeat Play
Set to see a recording over and over.
1
Press ACTION
to display
MAIN MENU.
1) Press
to select ‘VCR.”
2) Press
ACTION
to
display SET
UP VCR
screen.
TtMER PROGRAMMING
SELECT
SET
END
1
) Press AT
to
select
“REPEAT
PLAY.”
2)
Press
► to
set REPEAT
PLAY “ON” or
“OFF.”
Press ACTION
twice
to end setup.
• Playback repeats when tape end is reached or
unrecorded portion over 30 seconds is detected.
• During playback, you may also press PLAY/
REPEAT repeatedly on the unit to select
REPEAT “ON" or “OFF.”
Commercial Skip
By pressing the CM/ZERO button in Playback mode
you can skip over 1 to 3 minutes of recorded tape in
just a few seconds.
1
Press CM/ZERO
repeatedly to
select skip time in Play mode.
• No indication appears.
r~
OFF
♦
1st Press-
♦
2nd Press -
3rd Press -
____ )
-1 min Skip
-2 min Skip
'3 min Skip
26
For assislance,
please
call: 1-80&-211-PANA(7262) or send eHnal to ;
corisuniefprtxlLicte@panasoriicxom