Basic system with optional camera extension unit, Additional basic system – Panasonic WV-CM143 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic System with Optional Camera
Extension Unit
Connect the single coaxial cables between the cam
eras and monitor/camera extension unit (CAMERA
INPUT).
Connect the camera extension cable from the camera
extension unit at the Camera Extension Input
Connector on the monitor.
Camera Extension Units can be connected up to 31
units.
■ Additional Basic System
• Connect the coaxial cables between the cameras and
monitor.
• Connect the Sync Timing Cable between the monitors.
TIMING SELECT: INT
Color Monitor WV-CM143
Note: The Timing Selection of the master monitor is posi
tioned at INT and the Timing Selection of the slave
monitor is positioned at EXT.
Caution; The CAMERA INPUT 1 connector can accept the
Multiplexed VD (VD2) signal from the specified CCTV
System Color Camera.
Be sure to connect the camera after turning off the
Camera Power On/Off Selection Switch.
-13-