Remote control for video monitor – Panasonic WV-CM143 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Control for Video Monitor
Notes:
1, When the alarm signal operation will be made in this
system Connect the Time Date Generator according to
the need.
2. When the alarm signal operation will be made in this
system, the alarm signal should be supplied from the
Time Lapse VTR.
Refer to the Operating Instructions of Time Lapse VTR
for details.
VTR mode
Setting Position
Monitor (A)
Monitor (B)
Recording
CAMERA
EXT
Playback
EXT
EXT
3. Input Selection Switch of this monitor should be set as
shown below.
4. The Color Monitor WV-CM143 (B) can not connect to
the camera.
5. The Color Monitor WV-CM143 (A) does not allow the
Color Monitor WV-CM143 (B) to recover into the
sequential mode,
6. Refer to the Operating Instructions of Time Lapse VTR
for the recording detail.
-17-