Connection with time lapse vtr, System connection – Panasonic WV-CM143 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
■ Connection with Time Lapse VTR
SYSTEM CONNECTION
Main Unit
Notes:
1. When the alarm signal operation will be made in this system, the alarm signal should be supplied from the Time Lapse VTR.
2. When you want to cancel the alarm signal from the monitor side, supply the reset signal of this monitor to the RESET IN con
nector of the VTR.
In this connection, the polarity of both signals should be positive,
3. Refer to the Operating Instructions of Time Lapse VTR for the recording detail.
-16-
Advertising