Panasonic CF-48 - Manual (Page 12)

First-time Operation
lWjn9oii^2l)lS®
<Model with only an internal modem port>
Perform the following steps(T)-® and@, @.
<Model with both an internal modem and internal
LAN port>
Perform the following steps (l}- .
V
Do not press any key or move the touch pad until [Windows 2000 Professional Setup]
is displayed.
y
(T) At the [Welcome to the Windows 2000 Setup Wizard], then press [Next].
@ After reading the agreement, select [1 accept this agreement] or [1 don't accept this
agreement], then press [Next],
NOTEy
If [I don’t accept this agreement] is selected, the Windows setup will be aborted.
@ Select settings for your region, then press [Next],
( 4 ) Enter your name and organization, then press [Next].
A note >
<During the setup procedure only after reinstalling>
The [Your product key] is displayed after you enter your name and organiza­
tion.
Input the Product Key written down in the “Customer’s Record”, then press
[Next], ((j* page 9 step 2)
V_____________________________________________________________________________________________________ _
Enter your computer name and administrator password, then press [Next].
V
Remember this password! If the password is forgotten, Windows 2000 cannot be
operated.
(6) Input the correct date, time and time zone and press [Next].
You can also complete these settings at a later time.
( 2 ) At the [Network Settings], select [Typical settings], then press [Next].
(g) At the [Workgroup or Computer Domain], select [No, this computer is not on a net­
work, or is on a network without a domain], then press [Next],
( 9 ) Press [Finish]. The computer will restart.
@ At the [Network Identification Wizard], then press [Next].
(Jl) At the [Users of This Computer], select [Users must enter a user name and password to
use this computer], then press [Next].
@ Press [Finish],
@ Enter your administrator password, then press [OK].
NOTE
>
• About the steps after (?), we recommend asking your system administrator or the
person in charge of the network.
At the IGetting started with Windows 2000]:
• Press [Exit] to close.
• When selecting [Discover Windows], the computer may ask you to install the Win­
dows 2000 CD. In such cases, close the windows, and then specify
[c:\winnt\cdimage\discover], then select [OK].
12