Display message, Cause and remedy, Irroir messages ©in the display – Panasonic KX-FP200 User Manual
Page 60: Coot.)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
irroir messages ©in the display
(coot.)
DISPLAY MESSAGE
CAUSE AND REMEDY
REDIAL TIME OUT
oThe receiving unit is busy or ran out of recording paper. Try again.
REMOVE DOCUMENT
oThe document is jammed. Remove the jammed document {p. 66).
oAttempted to transmit a document longer than 600 mm (23%"). Press the STOP
button and remove the document {p. 66).
Divide the document into two or more sheets and try again.
REMOVE PRINTOUT
oThere is too much paper on the paper stacker. Remove the printed paper. If the
display message still remains after removing the paper, a paper jam may have
occurred. Remove the jammed paper (see “When paper has jammed near the
recording paper exit” on page 65).
STARTER FILM END
oThe starter film is empty. Replace the film or film cartridge with a new one
(p. 67, 68).
TRANSMIT ERROR
oA transmission error occurred. Try again.
UNIT OVERHEATED
OThe unit is too hot. Let the unit cool down.
60