Clh@(dlkiiinig slhie iremaiiiniiiiriig film, Repladog ite film oir film garfidclge, Replacing the film or film cartridge – Panasonic KX-FP200 User Manual
Page 67
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Roistme cam
Clh@(Dlkiiinig Slhie iremaiiiniiiiriig film
You can check the amount of remaining film. Press
[FILM REMAINING]
while the unit is idle. The display
indicates the approximate amount of remaining film.
When the film indicator points to this position, the remaining film will print up to
25 pages of letter size documents. Prepare a new film or film cartridge for
replacement.
Repladog ite film oir film Garfidclge
When the unit detects the end of the film, the following message will be displayed.
FILM NEAR EMPTY
FILM EMPTY
The remaining film prints approx. 15 letter size documents. Prepare a new film or
film cartridge.
The film is empty. Replace the film or film cartridge with a new one.
To order replacement parts, see page 6.
1
4
Slide the front cover open lever forward to unlock
the front cover and lift to open.
Remove the film cartridge.
o|f you have purchased a film cartridge (Model no.
KX-FA135) for replacement, skip to step 9.
oTo replace only the film, go to step 3.
Unlock the four gears by (®) pulling the top side
gears (blue and green gears) forward and ((g))
pushing back the bottom side gears (green gears).
Remove the used film.
Remove the four gears from the used film cores.
Caution:
oThe film is not reusable. You can order a new
film for replacement through your nearest
Panasonic dealer.
(continued)
6 7