Day and time adjustment, To check the day/time, Preparing the answering system – Panasonic KX TC1503B User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^ Preparing the Answering System
Day and Time Adjustment
Voice Dayn’ime Stamp: During playback, a synthesized voice will
announce the day and time that each message was recorded.
1
Press (REDIAL/PAUSE/PROGRA^.
•The TALK indicator flashes.
Press (FLASH/CALL WAIT/PLAYBACK
•“P” is displayed on the base unit.
•The IN USBCHARGE/HOLD
indicator on the base unit lights.
Press (0).
•“Set time”
is announced.
If
previously
adjusted, the day/time will be heard.
Enter the current time {hour and
minute) using a 4-digit number.
(Ex. To set 9:30, enter “0930”.)
•The 2 digits of the entered number is
displayed.
Press ® to select “AM” or “PM”.
Press [#] repeatedly to set the day.
Press [ REDIAL/PAUSE/PROGRW.
•The unit announces the day/time.
The clock starts working.
TALK indicator
(OFFI
IREDIAL/PAUSE/PROGR
FLASH/CALL WAIT/PLAYBACK]
•In step 4, you cannot enter numbers greater than 12.
Do not use military time.
(To set 13:00 hours, enter “0100" and select “PM” by pressing (*}■)
If a power failure occurs, the time may be shifted. When “©”
flashes on the base unit display, reprogram the current day/time.
To check the day/time
Press (REDIAL/PAUSE/PROGRAMi ^ [FLASH/CALL WAIT/PLAYBACKl ^
•The current day/time is heard. When finished, press
[OFF].
18