Automatic answering operation, Setting the unit to answer caiis, Monitoring incoming caiis – Panasonic KX TC1503B User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Automatic Answering Operation
When the unit answers a call, a greeting message is played and the
caller’s message is recorded.
•The total recording time (including greeting message) is about
15 minutes. If messages are recorded in noisy rooms, the time
may be shortened by up to 3 minutes.
•A maximum of 64 messages (including greeting message) can be
recorded.
Setting the Unit to Answer Caiis
Press
[ANSWER QN]
to turn on the answering system.
•The indicator lights and
“Answer set" is
heard.
•The unit will announce the remaining
recording time if it is less than 5
minutes.
• If you hear
“Memory full", “
BJ31’’
is
displayed on the base unit and the
ANSWER ON indicator flashes rapidly,
erase some, or all, of the messages
(p. 33).
• If you do not want the unit to answer calls, press [ANSWER ONl again to turn
off the answering system. The indicator light goes out and
“Answer off” is heard.
•You can also turn on the answering system remotely using any other phone
(p. 39).
Monitoring incoming caiis
While a call is being recorded, you can monitor it through the speaker.
To answer the call, lift the handset off the base unit or press 13 or [3
on the handset. The unit stops recording.
29