Remove the battery holder from the main unit, Insert the lithium battery into the battery holder, Note – Panasonic AG-DP800HP User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The unit is shipped from the manufacturing plant with the back-up battery already installed. There is no need to install this battery
immediately after purchasing the unit. Skip this section and move on to the next procedures which are for initializing the memory
and setting the date and time.
Remove the battery holder from the main unit.
Insert the lithium battery into the battery holder.
(Make sure the “+” and polarities are aligned properly.)
With the triangular marks on the main unit and on the battery holder
facing each other, fit the battery holder back into the main unit.
NOTE
The service life of this battery is approximately one year. When it has mostly discharged, the “BACK UP ВАТТ EMPTY" display
will appear in the viewfinder for several seconds when the power switch is set to ON.
Replace with a new lithium battery (Panasonic CR2032).
27