Note – Panasonic AG-DP800HP User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press the VTR START/STOP button to start the recording.
The REC tally lamp inside the viewfinder keeps on flashing until the
recording mode is established. Once recording commences, it
stops flashing and remains lighted.
Press the VTR START/STOP button to suspend the recording.
When the recording is suspended as shown in the figure below, the tape is rewound by about 30 frames and the rec
pause mode is established. When the recording is resumed, recording commences where the previous recording will
be slightly overlapped.
I i
NOTE
This unit does not have a function which ensures that the REC/PAUSE mode will be released after a certain period of time has
elapsed. This means that when it is kept in the REC/PAUSE mode for an extremely long period of time, the tape may be
adversely affected. As a general rule, take steps to change the operating mode every hour or so.
41