Panasonic AG-DP800HP - Manual (Page 72)

DIAGNOSIS Menu (Continued)
Operation method and example of display on EVF or at LINE OUT connector of VTR
■D 1 AGNOS i S-
-►G 1 ERROR LOG DATA
02 CYL1NDER 1 BOOh
03 CAMERA Ver <1 . 0>
04 SERVO Ver A<1 . 1 >
05 SYSCON Ver B<1 . 2>
06 MEMORY I N I T , , ?
* * PREVIOUS MENU
- - - - END OF DATA - - -
-ERROR LOG DATA-
SLACK-REEL NG
+♦ PREVIOUS MENU
- - - - END OF DATA
NO ERROR:
When no error has occurred
SLACK-REEL NG:
When the reel has locked
SLACK-CYLINDER NG:
When the cylinder has locked
SLACK-LOADING NG:
When the loading motor has
locked
The ERROR LOG DATA details can be checked on the sub-sub screen.
Operation method:
D
To display the sub-sub screen:
Use the SHIFT button to align the arrow with “01 ERROR LOG DATA," and press the START button.
B To return to the sub screen display:
Use the SHIFT button to align the arrow with "sk ^PREVIOUS MENU," and press the START button.
To initialize the memory after the back-up battery has been replaced
D
Press the SHIFT button to align the arrow with “06 MEMORY INIT.?”
H Press the START button.
When initialization is completed, “06 INITIALIZED" appears.
NOTE
The memory will not be initialized properly-if the menu is exited or operation is returned to the MAIN MENU before
“06 INITIALIZED" has appeared.
72