Panasonic NV-HD620 - Manual (Page 16)

Setting the Clock of your VCR
The built-in digital clock is used to activate the timer for
automatic recording and must be set to the correct time. It
employs the 24-hour system.
Example:
Date; 16 October, 1999
Time; 20:15
Preparations
•Confirm that the TV is on and the
VCR viewing channel is selected.
•Turn on the VCR.
•Press VCR/TV to select the VCR
mode. (NV-HD620EA only)
Time Reset Function
If the clock is (ess than two minutes
slow or fast, it can easily be reset to
the proper time.
Example:
Resetting the clock to 12:00.00
1 Select CLOCK SET from the OSD
menu and press ENTER.
2 When the current clock display on
the VCR is between 11 ;58.00 and
12:01.59, press MENU as soon as
you hear the 12:00.00 signal. This
resets the time to 12:00.00.
Operations On Screen Display
1
o
Press MENU.
Select CLOCK SET.
2
Set each item by pressing A or ▼ and ►. Press ◄ to
return to the previous item.
MB «¡M .S,
»1ft» .A
SEUKTrBtt '
STARTiHENU
Set Year (Y) to “1999".
CX>
Y J» D HiM
ION -ItOl 1 OM
aeLECTiOa ' -/+:!
STAnT:MENU
L
Set Month (M) to “10”.
iiSi
SEuuTxoa -i-f
L.
Set Date (D) to “16”.
Y M O
I«w « It r;
saAcmts -№D(i .
STARTiMOtU .
L
Set Time (H:M) to “20:15”.
•When it is kept pressed, the
indication changes in 30-minute
steps.
•There is no need to press ►.
Display Symbol
O
Press MENU.
•The clock starts.
Note: *
The clock operates for at least 60 minutes on its backup system in the event of a
power failure.
16