Using the control panel – Panasonic KX-P2023 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Using the Control Panel
Resetting All Current Settings to the Factory Settings
Follow the instructions below:
If there is paper loaded, you will automatically get a printout of the current settings.
2.
(D
While pressing ( LOAD/PARK], turn
the power on, then release.
Make sure that both FONT indicators are
blinking.
O
Q.
(D
Press ( TEAR OFF ).
All the current settings will be reset to the
Factory settings.
NLINE
TEAR
OFF
LF/FF
LOAD 1
1
/ /
Press ( LOAD/PARK).
A printout will verify the current setting.
You have exited the Initial Setup Mode.
36
Advertising