Command reference program, Insert your setup disk into either drive a or b, For dos – Panasonic KX-P2023 User Manual
Page 54: For windows, Select run from the file menu, Screen 1 will be displayed
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Command Reference Program
The Command Reference program allows you to display the detailed explanation of each software
command on the screen. Each displayed explanation can be printed out if required.
Before you use the Setup Disk, it is recommended that you make a back-up copy and store the original
in a safe place.
• U
m
the DISKCOPY commiand of fhe operating system to make a back-up copy. Refer to your
DOS manual lor further Information,
• Type A:\INSTA1X [j] to copy the programs from your Setup Disk onto your hard drive. This
procedure automaticalty creates a directory called 2023 and copies all of the programs from your
Setup Disk onto your hard drive.
1
Insert your setup disk into either drive A or B.
<For DOS>
2
Type
A: (or B:) and
[Enter).
2
Select
CMDREF
3
Type
[ Enter ].
4
Click
<For WINDOWS>
Select Run from the File menu.
Screen 1 will be displayed.
Screen 1
« Panasonic KX-P2023 command reference utility (xxxxxxxxxxx) »
- - SELECT EMULATION - -
EPSON
IBM
[ T ) / [ i ]
(Enter)
tE]
Select emulation
Set emulation
Exit to DOS
54