Panasonic KX-FP101NZ - Manual (Page 50)

Sending Faxes
Multiple stations
This feature is usefu! for sending the same document to selected parties whose telephone numbers are stored
in the One-Touch Dial or EASY DIAL directory. You must program the desired parties into one of the
BROADCAST keys (One-Touch Dial keys 1,2 or 3).
Important:
• Before programming, make sure that the desired telephone numbers have been stored into the One-Touch
Dial or EASY DIAL directory.
• The BROADCAST keys can be used as One-Touch Dial keys 1, 2 or 3 or as broadcast keys. These functions
cannot be used at the same time.
Programming the BROADCAST keys with telephone numbers
1 Press
[DIRECTORY PROGRAM].
Display: PRESS STATION
USE EASY DIAL
Press one of the
(BROADCAST]
keys.
DIAL MODE TA
2 Press or (5 to select “BROADCAST”.
Example: broadcast i ▼A
Press
(START/SET/COPY).
DIR= [ 0 0 0 ]
Enter the station.
a: Using the One-Touch Dial:
For stations 1-3 which are not used as
(BROADCAST] keys,
press the preset
One-Touch Dial key. ________________
For stations 4-6,
press
(LOWER],
then press
the preset One-Touch Dial key.
Example; DIR=Luke [ 0 0 1 ]
b: Using the EASY DIAL directory:
Rotate
(EASY Dl/^
until the desired name is
displayed.
Example: John [ 0 0 1 ]
Press
(START/SET/COPY).
Example; DIR-John
002
]
To enter other stations, repeat this step (up to
20 stations).
Press
(START/SET/COPY]
after entering
all of the desired stations.
REGISTERED
PRESS STATION
USE EASY DIAL
To program another BROADCAST key,
repeat steps 2 to 6.
Press
[DIRECTORY PROGRAM
] to exit
the program.
®/®
I
BROADCAST)/
One-Touch Dial keys
CD®®
:®®®
:®®®0:Cr®
(STOP) (EASY DIAL)
SfÀRf/SET/^PY] (LOWER
[Di^CTORY PROGRAM]
Note:
• If you make a mistake while programming,
press drop), then make the correction.
• Confirm the stored numbers by printing a
broadcast list (p. 88).
50