Panasonic KX-FP101NZ - Manual (Page 75)

Error Messages
Display
!f the unit detects a problem, one or more of the following messages will appear on the display.
Display message Cause & Remedy
CALL SERVICE
• There is something wrong with the unit. Contact our service personnel.
CHECK COVER
• The cover is open. Close it.
CHECK DOCUMENT
The document is not fed into the unit properly. Reinsert the document. If
misfeeding occurs frequently, clean the document feeder rollers and try again
(p. 87). If the problem remains, adjust the feeder pressure (p. 82).
CHECK FILM
The film or film cartridge is not inserted properly. Reinsert it correctly (p. 84-86).
CHECK MEMORY
• Memory (telephone numbers, parameters, etc.) has been erased. Re-program.
CHECK PAPER
• The recording paper is not installed or the unit has run out of paper. Install
paper and press
[START/SET/COPY
] to clear the message.
♦ The recording paper is not fed into the unit properly or has jammed near the
recording paper entrance. Clear the jammed paper and press
[START/SET/COPY
] to clear the message (see “When paper has jammed near
the recording paper entrance” on page 81).
Do not install folded or heavily curled paper in the paper tray.
FAX IN MEMORY
• The unit has a document in memory. See the other displayed message
instructions to print out the document.
FAX MEMORY FULL
Memory is full of received document due to a lack of recording paper or a
recording paper jam etc. Install paper or clear the jammed paper.
When performing memory transmission, the document being stored exceeds
the memory capacity of the unit. Transmit the entire document using manual or
automatic transmission.
X
<D
•D
FILM EMPTY
• The film is empty. Replace the film or film cartridge (p. 84-86).
• The film is slack. Tighten it (see step 3 on page 84 and step 8 on page 86) and
install again.
FILM NEAR EMPTY
- The remaining film can print about 10 pages of A4 size document. Prepare
new film or film cartridge (p. 12).
a
FREE FILM EMPTY
• The free starter film is empty. Replace the film or film cartridge (p. 84-86).
EASY DIAL FULL
• There is no space to store new stations in the EASY DIAL directory. Edit or
erase unnecessary stations (p. 33).
MEMORY FULL
When making copy, the document being stored exceeds the memory capacity
of the unit. Press
[STOP]
to clear the message.
MODEM ERROR • There is something wrong with the modem circuit. Contact our service personnel.
(continued)
75