Changing the degree of fatigue during the program, Additional information – Panasonic EP3203 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the Degree of Fatigue During the Program
• After pressing the button corresponding to the area you want to change and making any changes, press
• You can change the program even during mid-program by foiiowing the procedures on Pages 15 and 16.
OK ].
(1) Press to seiect the area
you want to change.
(2) Press to input the degree
of fatigue.
(3) Press i OK j after you have
finished making the desired
changes.
-Additional Information-------------------------------------------------------------------------------
The massage will be carried out in descending order from the greatest degree of fatigue.
• if the degree of fatigue seiected is the same, the massage wiii be carried out in the
foiiowing order. Neck -> Shouiders -> Back -> Lower Back.
• if the degree of fatigue seiected for any particuiar area is IW, then no massage
wiii be carried out in that area and the massage heads may mereiy pass over that
area on the way to the next seiected area.
• if the degree of fatigue seiected for the Neck to the Lower Back is miffl, no upper
body massage wiii be carried out.
• if the degree of fatigue seiected for the Legs is liffl, no air massage wiii be carried
out.
— Constantiy
Massaged
Degree of Fatigue Settings are NOT Massage Strength Settings
• The movement and duration of the massage is determined by the unit based on the degree of fatigue seiected.
• Use the Strength buttons to adjust the strength of the massage.
• Piease note that in the Seif Program massage strength for the iegs cannot be set to 0.
• The focus button cannot be used in Seif Program mode.
17