For replacement only, Note, Setup (base unit) – Panasonic KX-FPG175 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setup (Base Unit)
For replacement only
Remove the stoppers and tags from the new
ink film Find the ‘T’ shaped gear (blue)
Insert the blue core of the front ink film roll
into the right slot of the unit (0) Insert the
'T' shaped gear (blue) into the left slot of
the unit (@)
Insert the rear ink film roll ((0)
'T' shaped Rear ink film roll
Right
slot
Turn the ‘T’ shaped gear (blue) in the
direction of the arrow
■ Make sure that the ink film is
wrapped around the blue core
at least once
Correct
Incorrect
Tight
Blue core
The ink film is not wrapped
around the blue core
Ink film
Reverse
8
Close the back cover securely by pushing
down on the dotted area at both ends (0)
Close the front cover securely ((0)
■ The following will be displayed while the unit
IS checking that there is no slack in the ink
film
Display
P L E A S E W A I T
Note.
■ The ink film is completely safe to touch, and will not
rub oH on your hands like carbon paper
12
For fax advantage assistance, call 1-800-435-7329