Setup, Setting up the voice and fax message reception – Panasonic KX-FPG175 User Manual

Page 54

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Setup

____________________________________________________________________

TAD/FAX mode --------------

(receiving phone calls and faxes automatically)

When TAD/FAX mode is set, the unit will work as a fax machine and/or answering device

If a fax tone is detected, the unit will automatically receive the fax If a phone call is detected, the

answering device will play a greeting message and the caller can leave a voice message

Setting up the voice and fax message reception

1

Make sure that feature #77 is set to

“TAD/FAX" (p 75)

If the arrow (▼) is not shown on the right of

the display, turn it on by pressing

[AUTO ANSWER]

■ The unit will play the pre-recorded greeting

message

• The display will show the ring setting in

TAD/FAX mode

Display

PICKUP &RCV CALL

AFTER 2 RINGS[±]

If you wish to change the ring setting, press

or C3 until the desired setting (see

below)

IS

displayed, and press [SET]

■ You can adjust the speaker volume after

changing the ring setting Press or

(3 while listening to the greeting

message

■ The remaining time for recording incoming

messages will be displayed

Example

TIME = lQml3s

Note;

■ If the arrow (^] is already shown on the right of the

display and you wish !□ change the ring count, turn it

□ff once then on again by pressing [AUTO ANSWER)

and follDW the insiructions m step 3

The incoming message recording time can be

changed (feature #10 on page 69)

When the remaining time is low, erase unnecessary

messages (p 57) For the voice memory capacity of

incoming messages, see page 92

While an incoming call is being recorded, you can

monitor It Ihrough the speaker If this feature is not

required, set feature #67 to off (p 74)

Ring setting in TAD/FAX mode

You can choose from 1, 2, 3, 4, TOLL SAVER

and RINGER OFF

This setting can be changed by feature #06 on

page 6B

TOLL SAVER When you call the unit from a

remote location, the number of rings will tell

you if there are any new voice messages If the

unit answers on the 2nd ring, there is at least

one new recorded message If Ihe unit

answers on the 4th ring, there are no new

recorded messages To save the toll charges

for the call, hang up immediately when you

hearths 3rd ring The 3rd ring indicates that

there are no new recorded messages

RINGER OFF The unit will answer without

ringing

■ If you subscribe to a Caller ID service, set to

2 or more rings

54

Advertising