Field, Frame still and field still, I/p/b – Panasonic SC-HT70 User Manual

Page 47: Digital audio, Decoder, Dolby digital, Sampling rate, Pcm (pulse code modulation), linear pcm, Bitstream, Other

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

; :-f: .:;,if:■;"

%i0

-■

v'

■ ïi-y/'.'--x Htê'-'''--

Ji^'

■GtosMr>|vv''н-н.Ннv^lilíÉ;v'IMSÍffK^^

Video

Frame
Frames are the still pictures that go

together to make a moving picture. There
are about thirty frames shown each

second.

Field
One frame is made up of two fields. A
regular television shows these fields one
after the other to create frames.

One field

Frame still and field still

A

Still

is shown when you pause a moving picture. A frame still is

made up of two alternating fields, so the picture may appear
blurred, but overall quality is high. A field still is not blurred, but it

has only half the information of a frame still so picture quality is
lower.

I/P/B
MPEG 2, the video compression standard adapted for use with
DVD, codes frames using these three picture types.

Í: Intra coded picture (f-picture)

This is the standard picture and is a complete picture in itself. This

means it has the best picture quality and is the best to use when
adjusting the picture.
P: Predictive coded picture {P-picture)

This picture is calculated based on past 1 and P-pictures.

B; Bidirectionally-predictive coded picture (B-picture)

This picture is calculated by comparing past and future i and P-

pictures so it has the lowest volume of information.

Digital audio

Decoder
A decoder restores the coded audio signals on OVDs to normal.

This is called decoding.

Dolby Digital

This method of coding digital signals was developed by Dolby

Laboratories. The signals are highly compressed, enabling a large
amount of information to be recorded on one disc.

Sampling rate
This is the number of samples of sound taken per second during
conversion to a digital signal. Sampling frequency is expressed in

kilohertz (kHz), A high sampling frequency results in a sound close
to the original when played back.

PCM (pulse code modulation), Linear PCM
PCM is the usual digital method used for music CDs. DVDs have a

greater volume so they use linear PCM, which has a higher
sampling rate.

Bitstream

This is the digital form of multiple channel audio data (e.g.,
5.1 channel) before it is decoded into its various channels.

Other

Track
This is the smallest division on CD and video CD, and usually
equates to a single song.

■■■ ''v : '

Chapter
This is the smallest division on DVD and is roughly equivalent to a

track.

Title
This is the largest division on DVD,

Playback control (PBC)

This method of controlling disc play is included on version 2.0 video

CDs. You are able to interact with the disc through menus.

Advertising