Disc, Reference, The remote control – Panasonic SC-HT70 User Manual
Page 49: Isi the remote control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Disc
Reference
pages
The display 19' wroh
►
• The disc may be upside down.
• Replace the disc if it is scratched, warped, or nonstandard.
• Condensation may have formed in the player due to a sudden change in
temperature. Wait about an hour for it to clear and try again.
14
50
: Certain; sections
' pt^d.' ■-/■■■
J-'Ky
►
• Wipe the disc with a soft cloth if it is dirty.
50
N
0
ise IS: output when a CD is
;;played.',- ^V4;■ ■■
►
• Check the disc. If it is a DTS CD, it cannot be played.
—
“DTS NO A
u
DIQ!^ appfl^
►
• This unit is unable to decode DTS signals.
~
“DTS Cd” appears on the display.^
►
• This unit is unable to decode DTS signals.
—
‘^PVD 011 ” appears;; pn ; tita
►
• The disc is dirty. Wipe it with a soft cloth.
50
“DVD HDD” appears on the
.'display,-' V
►
• A problem has occurred. Turn the unit off and unplug the AC mains lead.
Wait a moment and then plug the mains lead in and turn on the unit again, if
the unit is still not working correctly, consult your dealer.
—
“TAKE OUT Disc” appears on the
,'dispiay.;.';’''''
►
• A problem has occurred with the tray mechanism. The tray will open
automatically. Take out the disc and close the tray. The unit will make the
disc changing noises for a few moments and then should operate normally.
—
Ydu have,forgotten your ratihps
, 'password;'.'
'
■
'
^
►
• Reset the unit to its original factory settings.
Do the following to restore the unit to the condition it was in at the time of
shipment. This clears the ratings settings.
Press [ B ] on the main unit and [>10/-/—] on the remote control at the
same time for about 3 seconds until the message “Initialized" disappears
from the television screen.
—
Languages ypu selected in the
initial settings menuara not used
for the soundtmcK and suMItte»^
►
• The selected languages are not recorded on the DVD or the DVD has been
designed to automatically play a certain language.
—
«ci
5
iSi
The remote control
Reference
pages
• Check the batteries are inserted correctly.
7
• Aim the remote control at the main unit and remove obstacles between
7
them.
* Repface the batteries if they are worn out.
—
• It may be in the TV or VCR operation mode. Press [DVD/CD] to operate this
12
unit.
• This remote control cannot operate some televisions or videos.