Panasonic SVGA Monitor/Receiver CT-36DV60 - Manual (Page 12)

Location of Controls for the Home Theater Remote Unit
0 lais © 00 ? (iE(Da|_
@0 0
Home Theater
Remote Control
TNQ2AE012
Basic Remote Control Functions
The following is a basic overview of the remote control
unit for TV/Monitor operation. Ensure the TV mode
button is selected by initially pressing .
(?) Power Button - Press to turn the TV ON or OFF.
(^Volume Buttons - Press to adjust TV sound level.
Use with Channel buttons to navigate in menus.
(^Channel Buttons - Press to select channels. Use
with Volume buttons to navigate in menus.
® Action Button - Press to display Main Menu and
access or exit On-Screen feature and Adjustment
Menus.
Input Button - Press to select TV or one of two (2)
Video Inputs. Also used to select Front or Rear PC
Input.
(§) Mute Button - Press to mute sound. A second
press returns sound.
(^Numeric Keypad (0 through 9 Buttons) - Press
desired channei to access any channel. ;
(1)R-Tune (Rapid Tune) Button - Switches between
two (2) channels.
(§) Recall Button - Press to display Time, Status or
Sleep Timer, Channel. Video Mode, Channel
Caption (Station Identifier), and Audio Mode.
^^Multi Button - Programmable to operate up to six
(6) Remote Function buttons simultaneously.
®VCR Functions Buttons - Programmable to
operate many brands of VCR’s.
^Mode Selection Buttons - Selects the operations
mode for the remote control.
©VCR/DSS Channel Buttons - These buttons are
used to select VCR or DSS channels (Up/Down).
Heipful Hints:
If the selected component does not respond to the
remote control, ensure that the proper mode is
selected.
First, press the Mode Selection Button
that corresponds to that component. For example,
after first pressing the TV mode button, the remote
will remain in the TV mode for any following
commands. If a different mode button is pressed
while operating the television, the TV mode button
must be pressed again to reset the TV mode
condition.
-11
-