Mp3/wma (continued), Sound setting, Sound setting cz – Panasonic Removable Full Front MP3 WMA /Receiver with CD Changer Control CQ-HR1003U User Manual

Page 59

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

□ MP3/WMA (Continued)

[

Trouble

) Q

CQ-HX1083U

Poor

recording

quality,

sound skipping.

Files are not played in

tile desired order.

г

Folder/fite name is not

displayed correctly.

File playing time is not

displayed correctly.

Cause/Step

^The recording quality differs depending on the encoding software

used, and on settings such as the bit rate. Set the bit rate within the

range specified in the specifications chart (page 75).

The suggested bit rate for MP3 is “128 kbps or more”, “Fixed.”

For WMA, the suggested rate is“ 64 kbps or more”, “Fixed”.

High-speed writing was executed when MP3/WMA data was recorded

on the disc.

"»Decrease writing speed as low as possible.

Filés or folders are not recorded in the desired playback order.

^Some writing software lets you specify the recording order by

adding a prefix in the range of “01”-“99”, etc. to the file name.

For details, refer to the user manual of your writing software.

The disc does not conform to the file systems supported by this player.

^Insert a disc that conforms to the file systems (ISO 9660 Level 1,

Level 2, Joliet, Romeo or Apple Extension to ISO 9660).

^There may be a problem with your writing software or CD recorder

(CD-R/RW drive). For details, refer to the user manual of your writ­

ing software.

You ran the file in fast forward or fast reverse during playback or turned
off the ignition switch of the car during playback.

^Playing another file will return the file playing time to normal.

You played a VBR (Variable Bit Rate) format file.

^The file playing time of VBR (Variable Bit Rate) format MP3 file is

sometimes displayed incorrectly.

□ Sound Setting

cz

Trouble

No

sound

from

left,

right,

front

or

rear

speakers.

r:

Left

and

right

sounds

are

reversed

in

stereo

listening.

Cause/Step

Left and right balance, or front and rear balance is off on one side.

^Adjust balance/fader setting as appropriate.

Cables are not correctly connected.

^Connect the cables correctly.

____________________ ^

The speaker wires are reversed between right and left.

^Connect the speaker wires to the correct ones.

CQ-HX1083/HR1003U

59

Advertising